Active filters
  • Categories: Dimmers
  • Categories: Metering
  • Categories: Power supply units
  • Categories: System devices
Bus power supply 640 mA

Reference: EK-AB1-TP

Brand: Ekinex

Bus power supply 640 mA

Review(s): 0
Plastic casing Connection to bus line with KNX terminal block Connection of 230 Vac power supply with screw terminals Classification climatic 3K5 and mechanical 3M2 (according to EN 50491-2) Pollution degree 2 (according to IEC 60664-1) Safety class II Installation on 35 mm rail (according to EN 60715) 4 modular units (1 MU = 18 mm)
More
Universal dimming actuator 2-fold

Reference: EK-GA1-TP

Brand: Ekinex

Universal dimming actuator 2-fold

Review(s): 0
Frontal programming pushbutton and LED Membrane keyboard with LEDs for status indication of outputs Pushbutton for switching operating mode (normal / programming) Connection to bus line with KNX terminal block Connection of outputs and 230 Vac power supply with screw terminals Installation on 35 mm rail (according to EN 60715) 4 modular units (1 MU = 18 mm)
More
Line/area coupler

Reference: EK-BA1-TP

Brand: Ekinex

Line/area coupler

Review(s): 0
Technical data 30 Vdc power supply by KNX bus Current consumption (from main bus line) ca.10 mA Functions Suppress device configuration on the sub line Enable or disable filtering of group messages Suppress device oriented messages Trace the traffic on the sub line Reduced number of retransmissions
More
Bus power supply 1280 mA

Reference: EK-AM1-TP

Brand: Ekinex

Bus power supply 1280 mA

Review(s): 0
Connection to bus line via KNX terminal Auxiliary power connection via dedicated screw terminals Power supply connection via screw terminals Degree of protection IP 20 (device installed) Climatic classification 3K5 and mechanical classification 3M2 (according to EN 50491-2) Pollution degree 2 (according to IEC 60664-1) Safety class I Mounting on 35 mm...
More
4-fold RGBW LED dimmer - Load current for each channel 4 A

Reference: EK-GC1-TP

Brand: Ekinex

4-fold RGBW LED dimmer - Load current for each channel 4 A

Review(s): 0
Frontal programming pushbutton and LED Membrane keyboard with LEDs for status indication of outputs Pushbutton for switching operating mode (normal / programming) CH pushbutton for individual or simultaneous channels control HSV / RGB pushbutton colour control mode Auxiliary dry contact to disconnect load power supply during standby Connection to bus line...
More
USB/KNX interface

Reference: EK-BD1-TP

Brand: Ekinex

USB/KNX interface

Review(s): 0
Technical data Power supply (bus side): 30 Vdc SELV, current consumption: max. 10 mA Power supply (PC side): from USB, current consumption: max. 20 mA
More
Bus power supply 640 mA with auxiliary output 30 Vdc

Reference: EK-AG1-TP

Brand: Ekinex

Bus power supply 640 mA with auxiliary output 30 Vdc

Review(s): 0
Connection to bus line with KNX terminal block Connection of auxiliary output with dedicated terminal block Connection of 230 Vac power supply with screw terminals Classification climatic 3K5 and mechanical 3M2 (according to EN 50491-2) Pollution degree 2 (according to IEC 60664-1) Safety class II Installation on 35 mm rail (according to EN 60715) 4...
More
4-fold 0-10 V actuator

Reference: EK-GF1-TP

Brand: Ekinex

4-fold 0-10 V actuator

Review(s): 0
Frontal programming pushbutton and LED Membrane keyboard with LEDs for status indication of outputs Pushbutton for switching operating mode (normal / programming) CH pushbutton for individual or simultaneous channels control HSV / RGB pushbutton colour control mode Connection to bus line with KNX terminal block Connection of outputs with screw terminals...
More
Back to top

Follow us on Facebook

Facebook