Connection to bus line via KNX terminal
Auxiliary power connection via dedicated screw terminals
Power supply connection via screw terminals
Degree of protection IP 20 (device installed)
Climatic classification 3K5 and mechanical classification 3M2 (according to EN 50491-2)
Pollution degree 2 (according to IEC 60664-1)
Safety class I
Mounting on 35 mm profile rail (according to EN 60715)
Device with 4 modular units (1 UM = 18 mm)
The Ekinex® EK-AM1-TP power supply produces and monitors the 30 Vdc voltage required for operation of the KNX bus system. A coil integrated in the device decouples the power supply from the bus line. The output has overload and short-circuit protection. It has an additional 30 Vdc output that can be used for auxiliary supply of other SELV devices. The total current provided by the two outputs (KNX bus line and auxiliary power supply) cannot exceed 1280 mA. The device is capable of supporting short mains voltage interruptions (max. 200 ms). Technical data Supply voltage 230 Vac, 50/60 Hz Power consumption 39 W Losses < 3 W Voltage on bus line: 30 Vdc +1/-2 Vdc SELV Voltage on auxiliary output: 30 Vdc Nominal current: 1280 mA Buffer time: 200 ms
Technical data
No customer reviews for the moment.
Reference: EK-AB1-TP
Brand: Ekinex
Reference: EK-AG1-TP
Brand: Ekinex
Connection to bus line via KNX terminal
Auxiliary power connection via dedicated screw terminals
Power supply connection via screw terminals
Degree of protection IP 20 (device installed)
Climatic classification 3K5 and mechanical classification 3M2 (according to EN 50491-2)
Pollution degree 2 (according to IEC 60664-1)
Safety class I
Mounting on 35 mm profile rail (according to EN 60715)
Device with 4 modular units (1 UM = 18 mm)
check_circle
check_circle
