Air quality multisensor and regulator 71 FORM
Rating
Integrated temperature and relative humidity sensors
VOC (Volatile Organic Compounds) sensor with output signal for CO2 equivalent and TVOC
Room thermostat function
Threshold regulator function for relative humidity, TVOC and CO2
Available an alarm signal on the CO2 level also useful to obtain 1 LEED certification point
Compatibility with Belimo actuators for the control of dampers in VAV boxes and 6-way valves
Plastic casing
Connection to bus line with KNX terminal block
Frontal programming pushbutton and LED
Wall-mounting installation on round or square wall box
IP20 protection degree (installed)
Weight 90 g (with mounting support)
Description
The Ekinex® multisensor with controller is a KNX S-mode device for independent temperature control of a room or building area. The module includes 3 sensors: temperature, humidity percentage and air quality, expressed in terms of TVOC (Total Volatile Organic Compounds) or CO2 equivalent. It can also function as a controller for these three quantities, valid for a single zone to be controlled. The front LEDs indicate the heating, cooling, dehumidification, humidification and TVOC or CO2 threshold status. The push-button and the programming LED are located on the front in the area below the button. The device integrates a KNX bus communication module and is intended for mounting onto a wall mounting box; it is supplied by a SELV voltage directly from the KNX bus and does not require any auxiliary power supply.
Product Details
EK-ES3-TP
Reviews
No customer reviews for the moment.
16 other products in the same category:
Reference: EK-EF2-TP
Brand: Ekinex
Touch&See display with 2-fold pushbutton FF Flank
3,5” TFT back-lit touch display, 320 x 240 pixel resolution, 65,536 colours
Seven main graphic pages
Integrated temperature sensor
2-fold pushbutton (possibility to configure up to 4 independent functions)
4 freely programmable LEDs for each channel
2 colour combination available for the LEDs (blue/green or red/white)
Plastic casing
Connection to bus line...
Reference: EK-E73-TP
Brand: Ekinex
Room temperature controller 71 NF
LCD-Display with adjustable backlight
4 capacitive pushbuttons for controlling of the thermostat functions
Integrated temperature sensor
Plastic casing
Connection to bus line with KNX terminal block
Frontal programming pushbutton and LED
Wall-mounting installation on round or square wall box
IP20 protection degree (installed)
Weight 90 g (with mounting...
Reference: EK-E73-TP
Brand: Ekinex
Room temperature controller 71 DEEP
LCD-Display with adjustable backlight
4 capacitive pushbuttons for controlling of the thermostat functions
Integrated temperature sensor
Plastic casing
Connection to bus line with KNX terminal block
Frontal programming pushbutton and LED
Wall-mounting installation on round or square wall box
IP20 protection degree (installed)
Weight 90 g (with mounting...
Reference: EK-PWS-DE
Brand: Ekinex
Square socket point - Schuko FF-71-VENTI-SIGNUM FORM
Connection of home devices with AC 250 V ~ voltage
Contacts protected by shutters
Mounting on a round or square wall box
Terminals for cables with section up to 2.5 mm²
Reference: EK-E73-TP
Brand: Ekinex
Room temperature controller 71 FLANK
LCD-Display with adjustable backlight
4 capacitive pushbuttons for controlling of the thermostat functions
Integrated temperature sensor
Plastic casing
Connection to bus line with KNX terminal block
Frontal programming pushbutton and LED
Wall-mounting installation on round or square wall box
IP20 protection degree (installed)
Weight 90 g (with mounting...
Reference: EK-E20-TP-4TS-PN
Brand: Ekinex
4-fold pushbutton with backlit text/symbols and proximity sensor 20Venti SURFACE
4 fold version (possibility to configure up to 4 independent functions)
RGB LED for each freely programmable rocker
Integrated temperature sensor
Integrated proximity sensor
Room thermostat function
Plastic casing
Connection to bus line with KNX terminal block
Wall-mounting installation on round or square wall box
IP20 protection degree (installed)
Reference: EK-E20-TP-8T-PN
Brand: Ekinex
8-fold pushbutton with backlit text/symbols and proximity sensor DEEP
8 fold version (possibility to configure up to 8 independent functions)
RGB LED for each freely programmable button
Integrated temperature sensor
Integrated proximity sensor
Room thermostat function
Plastic casing
Connection to bus line with KNX terminal block
Wall-mounting installation on round or square wall box
IP20 protection degree (installed)
Reference: EK-ET3-TP
Brand: Ekinex
Multisensor T - U.R. - CO2 eq. 71 FORM
Integrated temperature and relative humidity sensors
Integrated VOCs (Volatile Organic Compounds) sensor with output signal for CO2 equivalent
Room thermostat function
Threshold regulator function for relative humidity and CO2
LEDs for heating, cooling, dehumidification or CO2 threshold mode indication
Plastic casing
Connection to bus line with KNX...
Reference: EK-KSx-...
Brand: Ekinex
Keystone System FF-71-20Venti-Signum DEEP
HDMI & TV-SAT, ETHERNET & TV
Dimensions (WxDxH): approx. 29.7 x 21.9 x 17.4 mm
Operating temperature -10° to +60°.
Packaging temperature -40° to +70° C
Permissible humidity 10 to 90
Certificates: CE & RoHS
Integrated temperature and relative humidity sensors
VOC (Volatile Organic Compounds) sensor with output signal for CO2 equivalent and TVOC
Room thermostat function
Threshold regulator function for relative humidity, TVOC and CO2
Available an alarm signal on the CO2 level also useful to obtain 1 LEED certification point
Compatibility with Belimo actuators for the control of dampers in VAV boxes and 6-way valves
Plastic casing
Connection to bus line with KNX terminal block
Frontal programming pushbutton and LED
Wall-mounting installation on round or square wall box
IP20 protection degree (installed)
Weight 90 g (with mounting support)