Touch&See display FF Form
  • Touch&See display FF Form
  • Touch&See display FF Form

Touch&See display FF Form

EK-EC2-TP
Ekinex
Rating 

3,5” TFT back-lit touch display, 320 x 240 pixel resolution, 65,536 colours

Seven main graphic pages

Plastic casing

Connection to bus line with KNX terminal block

Connection to auxiliary power supply with yellow / white terminal block

Programming pushbutton and LED on the rear

Wall-mounting installation on round or square wall box

IP20 protection degree (installed)

Weight 110 g (with mounting support)

Kirjeldus

Ekinex® Touch&See is a KNX device for the switching, control and display of bus functions. By means of its touch-screen and its graphical user interface, it is possible to control KNX actuators in an easy and intuitive way, to display the information coming from the KNX actuators and sensors and to perform as a room thermostat for up to 8 independent zones, receiving the measured room temperature values from the bus. The device integrates a KNX bus communication module and is designed for wall mounting boxes; it is powered by a SELV voltage directly from the KNX bus and requires an auxiliary 30 Vdc power supply.

Toote üksikasjad
EK-EC2-TP
Kommentaarid

Hetkel pole ühtegi ülevaadet

Kirjutage oma ülevaade

Touch&See display FF Form

Touch&See display FF Form

3,5” TFT back-lit touch display, 320 x 240 pixel resolution, 65,536 colours

Seven main graphic pages

Plastic casing

Connection to bus line with KNX terminal block

Connection to auxiliary power supply with yellow / white terminal block

Programming pushbutton and LED on the rear

Wall-mounting installation on round or square wall box

IP20 protection degree (installed)

Weight 110 g (with mounting support)

Kirjutage oma ülevaade
Samas kategoorias on veel 16 toodet :

Tootekood: EK-ED2-TP

Bränd: Ekinex

Pushbutton with thermostat FF FLANK

Review(s): 0
4-fold (possibility to configure up to 8 independent functions) 4 freely programmable LEDs for each channel 2 colour combination available for the LEDs (blue/green or red/white) Integrated temperature sensor Room thermostat function Plastic casing Wall-mounting installation on round or square wall box Connection to bus line with KNX terminal block Frontal...

Tootekood: EK-VA2-WL-...

Voice assistant FF Form

Review(s): 0
Power supply 12-24 Vdc Current consumption 40 mW Wall mounting on round or square box Degree of protection IP20 (installed) Plastic housing and front cover Climatic classification 3K5 and mechanical classification 3M2 (according to EN 50491-2) Pollution degree 2 (according to IEC 60664-1) Dimensions: 80 x 80 x 38.5 mm (square) or 120 x 80 x 38.5 mm...

Tootekood: EK-EH2-TP

Bränd: Ekinex

Pushbutton 6 channels FF FORM

Review(s): 0
6-fold (possibility to configure up to 12 independent functions) 4 freely programmable LEDs for each channel 2 colour combination available for the LEDs (blue/green or red/white) Integrated temperature sensor Plastic casing Wall-mounting installation on round,square or rectangular wall box Connection to bus line with KNX terminal block Rear programming...

Tootekood: EK-E73-TP

Bränd: Ekinex

Room temperature controller 71 DEEP

Review(s): 0
LCD-Display with adjustable backlight 4 capacitive pushbuttons for controlling of the thermostat functions Integrated temperature sensor Plastic casing Connection to bus line with KNX terminal block Frontal programming pushbutton and LED Wall-mounting installation on round or square wall box IP20 protection degree (installed) Weight 90 g (with mounting...

Tootekood: EK-EQ2-TP

Bränd: Ekinex

Room temperature controller FF Form

Review(s): 0
LCD display with adjustable backlighting 2 keys for controlling the thermostat functions 4 freely programmable LEDs for each button 2 colour combinations available for LEDs (blue/green or white/red) Integrated temperature and relative humidity sensor 2 freely programmable inputs Plastic housing Bus line connection via KNX terminal Programming button and...

Tootekood: EK-EF2-TP

Bränd: Ekinex

Touch&See display with 2-fold pushbutton FF Flank

Review(s): 0
3,5” TFT back-lit touch display, 320 x 240 pixel resolution, 65,536 colours Seven main graphic pages Integrated temperature sensor 2-fold pushbutton (possibility to configure up to 4 independent functions) 4 freely programmable LEDs for each channel 2 colour combination available for the LEDs (blue/green or red/white) Plastic casing Connection to bus line...

Tootekood: EK-EH2-TP

Bränd: Ekinex

Pushbutton 6 channels FF Flank

Review(s): 0
6-fold (possibility to configure up to 12 independent functions) 4 freely programmable LEDs for each channel 2 colour combination available for the LEDs (blue/green or red/white) Integrated temperature sensor Plastic casing Wall-mounting installation on round,square or rectangular wall box Connection to bus line with KNX terminal block Rear programming...

Tootekood: EK-ES3-TP

Bränd: Ekinex

Air quality multisensor and regulator 71 FORM

Review(s): 0
Integrated temperature and relative humidity sensors VOC (Volatile Organic Compounds) sensor with output signal for CO2 equivalent and TVOC Room thermostat function Threshold regulator function for relative humidity, TVOC and CO2 Available an alarm signal on the CO2 level also useful to obtain 1 LEED certification point Compatibility with Belimo actuators...

Tootekood: EK-E13-TP

Bränd: Ekinex

Pushbutton with thermostat 71 FLANK

Review(s): 0
4-fold (possibility to configure up to 8 independent functions) 4 freely programmable LED for each channel 2 colour combination available for the LED (blue / green or red / white) Room thermostat function Integrated temperature sensor Plastic casing Connection to bus line with KNX terminal block Frontal programming pushbutton and LED Wall-mounting...

Tootekood: EK-EF2-TP

Bränd: Ekinex

Touch&See display with 2-fold pushbutton FF Form

Review(s): 0
3,5” TFT back-lit touch display, 320 x 240 pixel resolution, 65,536 colours Seven main graphic pages Integrated temperature sensor 2-fold pushbutton (possibility to configure up to 4 independent functions) 4 freely programmable LEDs for each channel 2 colour combination available for the LEDs (blue/green or red/white) Plastic casing Connection to bus line...

Tootekood: EK-DQV-GB_

Bränd: Ekinex

“Virtual” pushbutton Signum DEEP & SURFACE

Review(s): 0
Up to 4 buttons per screen and up to 3 screens in total can be configured Haptic pressure feedback Control and dimming of lighting devices Control of motorised drives for blinds (such as roller shutters, awnings blinds or shutters) Partially programmable attributes for each button 2.65” IPS RGB display, 162 x 320 pixels, 262K colours with haptic feedback...

Tootekood: EK-E73-TP

Bränd: Ekinex

Room temperature controller 71 SURFACE

Review(s): 0
LCD-Display with adjustable backlight 4 capacitive pushbuttons for controlling of the thermostat functions Integrated temperature sensor Plastic casing Connection to bus line with KNX terminal block Frontal programming pushbutton and LED Wall-mounting installation on round or square wall box IP20 protection degree (installed) Weight 90 g (with mounting...

Tootekood: EK-E13-TP

Bränd: Ekinex

Pushbutton with thermostat 71 DEEP

Review(s): 0
4-fold (possibility to configure up to 8 independent functions) 4 freely programmable LED for each channel 2 colour combination available for the LED (blue / green or red / white) Room thermostat function Integrated temperature sensor Plastic casing Connection to bus line with KNX terminal block Frontal programming pushbutton and LED Wall-mounting...

Tootekood: EK-EC2-TP

Bränd: Ekinex

Touch&See display FF NF

Review(s): 0
3,5” TFT back-lit touch display, 320 x 240 pixel resolution, 65,536 colours Seven main graphic pages Plastic casing Connection to bus line with KNX terminal block Connection to auxiliary power supply with yellow / white terminal block Programming pushbutton and LED on the rear Wall-mounting installation on round or square wall box IP20 protection degree...

Tootekood: EK-E13-TP

Bränd: Ekinex

Pushbutton with thermostat 71 NF

Review(s): 0
4-fold (possibility to configure up to 8 independent functions) 4 freely programmable LED for each channel 2 colour combination available for the LED (blue / green or red / white) Room thermostat function Integrated temperature sensor Plastic casing Connection to bus line with KNX terminal block Frontal programming pushbutton and LED Wall-mounting...

Jälgi meid Facebookis